CARRY-81

Demystifying Holsters.

Experienced gun carriers often joke among themselves about the “drawerful” of holsters they’ve accumulated over the years — and don’t use. You can save yourself a lot of trouble by understanding holster variables from the get-go.

There are “3½” objectives of any concealment holster: security (while running, moving, etc.), access (from all positions, including while on the ground) and effective concealment. And the half-consideration: 1-hand re-holstering ability, which is essential if you want to practice with your gun and holster. These objectives can work against one another, so trade-offs are necessary.

CARRY-1_1b

The Galco Combat Master is the perfect example of a leather,
pancake-style, FBI-cant, medium-ride, hip holster … quite
a mouthful, eh?

CARRY-7b

A favorite among military users, the BLACKHAWK! SERPA
concealment holster offers superb retention and comfort.

Popular Holsters

The most popular holsters are hip holsters, and they ride on a belt outside the pants on the strong side. Pancake holsters are made of two pieces of material with the gun sandwiched between them, and they have two or more belt slots. “Askins”- or “Avenger”-type hip holsters are made of one piece of material folded around the gun, and usually have a belt slot on the rear of the holster and a belt loop sewn on the back of it.

Inside-the-waistband (IWB) holsters are worn inside the pants and attach to the belt with loops or hooks. This type of holster is the most concealable, but requires pants with about an inch more in the waist than you normally wear. A Summer Special-type IWB has the rough side of the leather on the outside to help keep the holster anchored in place. Some IWB’s have a flange or tab to the rear for the same reason.

Crossdraw holsters are worn on the off side of the body. They are practical for people who spend a lot of time in cars, but they’re less concealable than hip holsters because they have to be worn in front of the hip.

Shoulder holsters are essentially uncomfortable crossdraw holsters. They’re specialty items, and are much less popular in the real world than what you see on TV. They require an open-front jacket, while most hip holsters can be concealed by an untucked shirt. Vertical-carry shoulder holsters are best for big guns. Horizontal-carry shoulder holsters are best for normal carry guns, and they’re worn high near the armpit — not low near the floating rib like so many catalog pictures show.

CARRY-4

The Bianchi X16 is a classic horizontal-carry, leather
shoulder holster with a thumb-release — beware, these
rigs are most comfortable on production sets.

CARRY-6b

This handsome pair of custom holsters is from Ralph’s personal stash —
he says the Garrity Stead-Fast (left) and Fist Holsters Speed
Scabbard (right) both carry excellently.

Other Holsters

Waist packs are useful in hot weather when clothing is light, but they make sitting and driving uncomfortable, and too many of them look like gun packs.
Paddle holsters are held in place with a paddle attached to the holster, which slides inside the pants and is held in place by belt tension. Their main virtue is their “quick-on, quick-off” capability — well-made ones can be as secure as hip holsters.

Ankle holsters are discreet, but require you to be stationary and in an awkward position when you draw from them. Pocket holsters are a convenient way to carry a smaller gun, and require no concealing garment. They can’t be drawn from while seated, though.

Small-of-the-back holsters carry the gun severely canted at the center of the back and aren’t recommended! If you fall you will be crushing your spine with the gun. Not to mention, they’re also uncomfortable when sitting.

CARRY-5

Ankle holsters, like this DeSantis 044, require you to be
stationary if you need to draw.

CARRY-8

The Nate Squared Tactical Professional IWB holster
features an adjustable cant and is made from
polycarbonate, a very durable thermoplastic.

Holster Attributes

Retention: Some holsters have something holding the gun in them other than friction. Speed scabbards, or open-top holsters, have no retaining device. The oldest retention device is the thumb-break, where a strap of material over the top of the gun is unsnapped with your thumb as the gun is drawn. There are many retention devices available on concealment holsters, and it usually takes one or more fingers on your drawing hand releasing one or more levers as the gun is drawn. The need for retention devices is very real for exposed guns but less so for concealment holsters, particularly for non-sworn citizens.

Materials: In synthetic materials, Kydex is the most popular, but many materials are used now. These holsters don’t lose their shape, nor do they get soft and rot in humid or sweaty environments and are slightly faster than leather on the draw. Leather is the traditional material for holsters, and with good reason. It can “give” a bit and conform to the shape of your body. Also, leather will bind the gun a little if your draw isn’t perfectly straight, which can be an advantage if you’re concerned about retention and don’t want to complicate things with a retention strap.

Custom vs. Manufactured: If you buy manufactured holsters from a top company, you can expect good to excellent quality. What they may lack is availability for unusual guns, and they tend to come in only one belt width. On the other hand, custom-made holsters can be superb. You can specify custom touches you want, get them made in special materials and have the holster fitted to precisely your preferred belt width. Generally, you can get them modified to suit any specific fit issues you have. You can also get holsters with features that would be too expensive to manufacture in quantity.

Loops And Belts: Most holsters come with belt slots or loops in a fixed width — usually 1¾”. Such holsters are advertised as “fitting belts up to 1¾” wide,” which is just plain wrong. In fact, such holsters will fit only 1¾” belts properly! It should be obvious a holster with slots wider than the belt they’re on will cause the holster to slip and slide around. A good gun belt should be between 1¼” to 1¾” wide.

Speaking of belts, it’s critical to wear a proper gun belt with your holstered gun. Gun belts come in widths of 1¼”, 1½” and 1¾”. Some are tapered in the front for a thinner width and are usually made of double-thick leather. Unlike ordinary belts, a proper gun belt will support the weight of the gun, and they’ll provide enough vertical leverage on the holster to prevent it from flopping away from your body.

Ride And Cant: The “ride” of a holster refers to the vertical height at which the gun is carried relative to the belt line. A normal-ride holster will have the trigger near the belt line. A high-ride holster will have the trigger above the belt, simple enough. A deep-riding holster will have the trigger below the belt. High-ride holsters are harder to draw from and can allow the grip end of the gun to flop out away from the body. Short-barreled guns can have this tendency even with normal-ride holsters. The ride of the gun, combined with the holster’s cant, will largely determine how comfortably a holster carries a particular gun for you.

The “cant” of a holster refers to how tilted forward from vertical the gun rides. A straight-drop holster has 0 degree of cant and carries the gun vertically. An FBI-cant holster has a cant of between 10 degrees and 20 degrees. Some holsters are severely canted to 30 degrees or more. More cant aids concealability and it might make the gun more comfortable and/or easier for you to draw. The preference of cant and ride is highly individual. You may find you prefer a different cant and ride for different guns, due to their differing grip angles and shapes.

CARRY-2_1

This High Noon Need For Speed shows an “Askins”-type
folded holster — which has one piece of material
that folds around the gun with a belt slot on its rear.

Holsters And Women

I’ll be blunt: Women have a very difficult time with concealment holsters. They tend to be shorter-waisted than men, making their drawstroke more difficult. They also tend to have greater hip flare, resulting in the grip of the gun being angled into their rib cage, which causes discomfort and difficulty in drawing.
Many manufacturers turn a man’s holster into a “woman’s holster” by either adding a wedge between the body and gun to compensate for the hip flare, or by lowering the ride of the holster considerably. Both “solutions” compromise concealability. Obviously, the slimmer and longer-waisted a woman is, the more likely she’ll be able to use a man’s holster — but almost all women find them unsatisfactory to some degree. Some custom makers, however, do make holsters properly designed for a woman’s anatomy.
For many women, off-body carry — with all of its inherent disadvantages — may be the best option. If a woman’s attire will allow for it, a crossdraw holster on the belt is the best option.

CARRY-3_1

Toting a Glock quite comfortably, the GL-2 ND from Fobus keeps
this semi-auto secured until it’s called into action.

Bottom Line

If you’re looking for a good “starter” holster, the best bet is to go with a normal-ride, FBI-cant or straight-drop, pancake-style speed scabbard and a proper gun belt able to fit it. This setup will work acceptably well, if not perfectly, for most of you. After you get accustomed to carrying, you can experiment with other holsters if you feel the need to try something new.
By Ralph Mroz
For more info: www.americanhandgunner.com/index

Read More Feature Articles

AHJF15_300

Oder Your Printed Copy Of The American Handgunner Jan/Feb 2015 Issue Today!

Donwload A PDF Of The American Handgunner Jan/Feb 2015 Issue Now!

GUNS

HOLSTERS

SOFT SKILLS

OFFICER SURVIVAL

WEAPONS TRAINING

EXPERTS

TAC-MED

KNIVES

STREET TACTICS

LESS LETHAL

FOLLOW US ON INSTAGRAM